Tools and wood
The kit for your project, each tool with its status and the checks it passed, and every board you bring home with its actual size, species and where it is settling. Seeded from your setup; everything you type stays in this browser.
For a first pass, the kit sheet is essential: it is how you avoid buying a tool the tote does not use, and where an inherited tool's checks are written down. The boards sheet is optional on a first pass; a reader who skips it loses the record of which board settled where, which matters only when a part moves or cups later. The first tools explains each row of the kit; Choosing wood explains each column of the boards sheet.
The kit
One row per tool. Status is have, borrowed, to buy or can wait. Checks done is what you looked at before trusting it: the flip test for a square, the plate for a kink, the back of a chisel.
Boards
One row per board. Write "unknown" for the species unless the label names it. A blank moisture reading or price means not measured or not known, not zero.
How to use these sheets
- One row per tool, one row per board. A set of chisels is one row per chisel, because each is sharpened and checked on its own. A board cut in two stays one row until the pieces go different places.
- Record, do not conclude. Checks done and moisture reading are what you observed; status is your decision. "Unknown" is an honest species; a guess written as a fact is the one entry that misleads you later.
- Keep it current. Change a row from to buy to have the day the tool comes home, and from have to can wait when you find you did not need it.
The example rows are Noor's (fictional). She had no tools, so the saw and the square are both to buy; the square passed the flip test at the store before she paid for it. Her two 1x6 boards came from a big-box store with no species on the label, so the species column says unknown, and the moisture reading is blank because she has no meter. The 1x8 for the tote's ends was added once the cut list flagged them as wider than a 1x6.
A row marked checked records what you looked at, not that a tool is safe or sound. A used plane can pass every check on this sheet and still need its sole flattened, and a board that was straight on recheck can still cup after it is cut. The tool in your hand and the board on your table settle it.