Tote project
What the tote carries, the space it has to fit, its parts with their finished sizes, and the build order from story stick to first use. This is the one ordered list in the manual; the chapters can be opened in any order.
For a first tote, two sections are essential: what it carries and the parts. Where it has to fit is essential only if the tote has a space to go into, like Noor's under her sink. The build order is optional: every chapter stands on its own, and this list is here for a reader who wants an order. Measuring without numbers fills in the first three sections; the cut list calculator can fill the parts.
What it carries
One row per thing the tote holds, measured at its largest. The story stick column is the letter you wrote beside its mark on the stick. Sizes are in inches, or millimeters if your setup says millimeters.
Where it has to fit
The space the tote has to fit and where it will live. Clear height and width are the inside of the space, measured at the tightest point.
Parts
One row per part, finished sizes. The cut list calculator can fill this from your inside sizes. Grain direction is the way the grain runs along the part.
Build order
The one ordered list in this manual. Each step names the chapter that explains it. Tick a step when it is done and add a note on what you changed.
How to use this sheet
- One row per thing it carries. Measure each item at its largest, with its lid or trigger on. Two identical items can share a row with a note.
- The stick comes first. Lay each item against the story stick before you write a number here; the numbers are for buying wood and for the calculators, and the stick is the check.
- Parts are finished sizes. Rough sizes come from the cut list. Tick Rough cut and Final size as each part reaches them.
- Anything under the handle has to be shorter than the handle's underside. Tall things stand beside the handle, not under it. A cardboard mock-up shows it before any wood is cut.
The example rows are Noor's (fictional) cleaning tote for the cabinet under her kitchen sink, with 11 1/2 in of clear height below the drain trap. Her spray bottles are 10 1/4 in tall, so they stand in a row beside the handle, with the cloths box on its edge on the other side of a divider that runs the length. Her ends run with the grain up and down, cut from a 1x8, because her 1x6 is narrower than the ends; that is allowed on the rabbet path and not with dovetails.
This sheet records sizes you chose. It does not say the tote will carry a given weight or that its handle will hold a full load; the wood, the fit and the glue decide that, and no source we found rates a small tote. Load it gradually the first time and watch the handle's shoulders and the corners.